PIDOTECH

고객지원

HOME>고객지원>논문

(SCIE) Mechanism for Reducing Stress Concentrations in Bolt-Nut Connectors

저자명	Chae-Ho Lee, Beom-Jun Kim, Seog-Young Han
게재지명	International Journal of Precision Engineering and Manufacturing
수록면	Vol. 15, Issue 7, pp.1337-1343
게재연도	2014.07

(SCI) Robust optimal design of a magnetizer to reduce the harmonic components of cogging torque in a HDD spindle motor

저자명	Changjin Lee · Gunhee Jang
게재지명	Microsystem Technologies
수록면	Vol. 20, Issue 8-9, pp. 1497-1504
게재연도	2014.08

(SCIE) INNOVATIVE DESIGN OPTIMIZATION STRATEGY FOR THE AUTOMOTIVE INDUSTRY

저자명	M. S. KIM, D. O. KANG and S. J. HEO
게재지명	International Journal of Automotive Technology
수록면	Vol. 15, No. 2, pp. 291−301
게재연도	2014.03

(SCIE) Optimal design of quadratic electromagnetic exciter

저자명	Ji Hyun Choi, Chang Hyun Park, Jin Ho Kim
게재지명	Journal of Vibroengineering
수록면	Vol. 16, Issue 2, pp. 925‑932, ISSN. 1392-8716
게재연도	2014.03

(SCIE) Optimal design of one-folded leaf spring with high fatigue life applied to horizontally vibrating linear actuator in smart phone

저자명	KIBUM LEE, CHANGHYUN PARK, and Jinho Kim
게재지명	Advances in Mechanical Engineering
수록면	Open Access, Vol. 2014, Article number 545126
게재연도	2014.02

(SCIE) Optimization of an Automobile Curtain Airbag using Design of Experiments

저자명	Yong-Won Yun, Jung-Sun Choi, Gyung-Jin Park
게재지명	Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
수록면	Vol. 228, Issue 4, pp. 370-380
게재연도	2014.03

(SCI) Design optimization of a laser printer cleaning blade for minimizing permanent set

저자명	Chang-Hyun Park · Jun-Hee Lee · Jae-Hyuk Jeong ·Dong-Hoon Choi
게재지명	Structural and Multidisciplinary Optimization
수록면	Vol. 49, Issue1, pp.131-145
게재연도	2014.01

(SCIE) Structural optimization procedure of a composite wind turbine blade for reducing both material cost and blade weight

저자명	Weifei Hu, Dohyun Park and DongHoon Choi
게재지명	Engineering Optimization
수록면	Vol. 45, Issue 12, pp. 1469-1487
게재연도	2013.12.01

(SCIE) Optimization of the lower arm of a vehicle suspension system for road noise reduction by sensitivity analysis

저자명	Yong-Dae Kim, Jae-Eun Jeong, Jin-Su Park, In-Hyung Yang, Tae-Sang Park,Pauziah Binti Muhamad, Dong-Hoon Choi, Jae-Eung Oh
게재지명	Mechanism and Machine Theory
수록면	Vol. 69, pp. 278-302
게재연도	2013.07

A New Methodology for the Development of Simulation Workflows : Moving Beyond MOKA

저자명	Author: Chan, P.K.M. / Mentor: Van Dijk, R.E.C.
게재지명	TUDelft 석사논문
수록면	-
게재연도	2013.03.15

(SCI) Development of a resilient cable joint for the insulation system of oil tanks

저자명	Park Hong Seok and Dahal Prakash
게재지명	Journal of Mechanical Science and Technology
수록면	Vol. 26 No. 11, pp. 3617-3624
게재연도	2012.11

(SCIE) Development and optimal design of a HDD spindle motor with pulling magnet to reduce electrical loss

저자명	Sangjin Sung, Gunhee Jang, Kyungjin Kang, Jiyeon Kim, Dohyun Park, Donghun Choi
게재지명	Microsystem Technologies
수록면	Vol. 18, Issue 9-10, pp. 1359-1364
게재연도	2012.09

(SCI) Design optimization of a wind turbine blade to reduce the fluctuating unsteady aerodynamic load in turbulent wind

저자명	Jihoon Jeong, Kyunghyun Park, Sangook Jun, Kisun Song and Dong-Ho Lee,
게재지명	Journal of Mechanical Science and Technology
수록면	Vol. 26, No.3, pp. 827-838
게재연도	2012.03

(SCI) Tolerance Optimization of a Mobile Phone Camera Lens System

저자명	Sangjin Jung, Dong-Hoon Choi, Byung-Lyul Choi, and Ju Ho Kim
게재지명	Applied Optics
수록면	Vol. 50, Issue 23, pp. 4688-4700
게재연도	2011.08

(SCI) Reliability Based Optimal Design of a Helicopter Considering Annual Variation of Atmospheric Temperature

저자명	Sanghun Kim, Sangook Jun, Hyungmin Kang, Yongjin Park and Dong-Ho Lee
게재지명	Journal of Mechanical Science and Technology
수록면	vol.25, issue 5, pp.1095~1104
게재연도	2011.05

(SCI) Optimum design of a radial heat sink under natural convection

저자명	Seung-Hwan Yu, Kwan-Soo Lee, Se-Jin Yook
게재지명	International Journal of Heat and Mass Transfer
수록면	Vol. 54, pp.2499~2505
게재연도	2011.05

(SCOUPS) Study on the Parametric Optimal Design of a Different-Speed Mixer

저자명	Fan Zhimin, Hu Weifei, Choi Dong-Hoon, Xu Jun
게재지명	Advanced Materials Research
수록면	Vol. 221 pp. 104~110
게재연도	2011.03.28

(SCI) A Multi-objective Optimization Using Distribution Characteristics of Reference Data for Reverse Engineering

저자명	In-Jin Hwang and Gyung-Jin Park
게재지명	INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
수록면	DOI : 10.1002/mme.3029 / Vol. 85, Issue 10, pp. 1323-1340
게재연도	2010

(SCI) Design Optimization for Optical Pattern in Light Guide Panel to Improve Illuminance and Uniformity of the Liquid Crystal Display

저자명	Gabseong Lee, Jae Ho Jeong, Sang-Joon Yoon, and Dong-Hoon Choi
게재지명	Optical Engineering
수록면	Vol. 48, Issues 2, Article Number: 024001
게재연도	2009.02

(SCI) Optimal Design of Slider Air-Bearing for Discrete Track Recording Technology

저자명	Sang-Joon Yoon, Seok-Ho Son, Jihoon Kang, Hyunki Kim, Jingyoo Yoo, and Dong-Hoon Choi
게재지명	IEEE TRANSACTIONS ON MAGENTICS
수록면	Vol. 45, Issue 5, pp. 2296-2299
게재연도	2009.05